3D Tape It Card

I am loving the new Tape It stamp set.  It would have to be in my top 5 favourite stamp sets in the new catalogue.  Washi tape it so 'in' at the moment and I just love that this stamp set enables me to Washi tape everything and I will never run out! I have been using it tonnes on projects, and wanted to share with you my most recent project that I cased from Jenny Peterson, so you can try making it at home yourself.  

With this card, the only cardstock I have used is Crumb Cake (#121685).  The 3 washi tape design stamps have been chosen are the 3 longest stamps in the set.  As you can see above, they will need to be long enough to sit under the opening. 

I stamped my images using Daffodil Delight (#126944), Gumball Green (#126861) and Tempting Turquoise (#126952) onto a few scraps of cardstock I had.  I also used Crumb Cake (#126975) as the background for my greeting which I stamped in Tempting Turquoise.

The greeting I used is from one of the greeting stamp sets called Four You.

Next I cut out the stamped images, and adhered the coloured pieces to another scrap of Crumb Cake - putting aside the greeting piece for later.  I trimmed the excess overhand of my pieces, down to the same length as the green pieces.  Then put it aside with your greeting. 

Next I cut a piece of Crumb Cake cardstock to 10 x 14.3cm.  Using a ruler I found the centre of the cardstock and drew myself some short lines in the centre to help me line up my framelit.  The framelit I used is from the Labels Collection. I used framelit #2.

Using my Magnetic Platform (#130658) for the Big Shot, I was able to line up my framelit perfectly, making sure the centre of the cardstock was in the centre of the framelit.  Once I cut this out, I put it aside.

Next you need to make your framelit border to go over the centre cut out. To do this, I grabbed another Crumb Cake cardstock scrap from my stash, and using my Magnetic Platform again, I put down framelit #2, and then framelit #3 around it, making sure it was perfectly aligned. 

All you need is the border you have created, so you can put away, or throw out the other two pieces.  I used a little bit of Crumb Cake ink to sponge around the edges and also I smudged a little ink over the border so it was slightly darker. 

Using my 2-Way Glue Pen (#100425) I stuck down the border around the larger cutout I prepare earlier. Using my sponge & Crumb Cake ink I sponged around the outside of the rectangle.

See those splotches in the corner?  I used the Gorgeous Grunge Stamp Set (#130517) for that using Crumb Cake ink.  

The last set because assembling everything together, is to wrap some Linen Thread (#104199) around the left edge of the card and the opening in the centre.  I looped it around around 5-7 times.  Just keep going until you are happy with the thickness and look.  Knot it at the back and pop a little piece of stick tape over it to keep it in place.

Now comes the easy part.  Putting it all together! 

  

Place a few Dimensionals (#104430) around the cutout on the back of your decorated piece of cardstock.

This is where you can stick down your piece of cardstock that has all the Washi Tape cutouts adhered to it! Once you've stuck that down, pop a few more dimensionals around the outside of the top piece, and put a little adhesive on the backing of the washi tape piece. Cut a piece of Crumb Cake cardstock at 14.8 x 10.5cm (half an A4 sheet) and fold it in half using your Bone Folder (#102300).  You can now adhere the front piece to the card!

Now you need to put on your greeting piece.  You will need to do double decker dimensionals on the back so that it sits up high enough! 

One more step and you are done.

Pick a button, I chose the largest green button from the Regals (#130029) which is Garden Green, but I thought it looked fine along side the Gumball Green ink on the card. Using a piece of Linen Thread, tie a bow through the button.  I find the best way to stick down buttons is to use Glue Dots (#103683).

Such a beautiful card that is suitable for any sort of greeting to suit your needs!

Buy 3 get 1 free DSP promotion

For the month of August, Stampin' Up! has a great DSP promotion.  Buy 3 packs of Designer Series Paper (DSP) and receive a 4th pack for free.  

There are a few different ways that you can take advantage of this promotion.  Maybe you need to boost your stash of DSP, so you keep all 4 packs to yourself.  Or maybe you can ask around your friends, and split the bill amongst everyone.  

There are a few exclusions in the fine print though, so let me run you through those.  It does not include any Paper Stacks, Specialty DSP, or DSP from the holiday catalogue.  This promotion is also not able to be used through hostess benefits.  But do not fear, because there are still 11 paper packs available.  And here they are:

Something I really love about this promotion, is that there are NO limits to how many you can purchase.  Order 3, get 1 free.  Order 6, get 2 free.  Order 9, get 3 free.  So you really could go to town!!! Check out pages 151, 153 & 154 in your catalogue.  If you don't have a catalogue then you can view it online here.

Either get in contact with me to order, or you can order online. I've already had a few of my customers take full advantage of this promotion and hope that you do too!

 

Window Frames Builder Card

I did a framelits themed workshop for one of my lovely customers over the weekend.  I wanted to show you a neat card that I made and demonstrated at the workshop! I made it using the Window Frames Collection framelits.  The Window Frames collection consists of 6 layering dies with the largest die being 12.5 x 12.5cm.  Typically it co-ordinates with the Friendship Preserves & Forever with You Stamp Sets, but since I don't own either of these, I had to check out the stamp sets that I did have to find something that would tuck nicely into one of this shape framelit.

The stamp set I ended up using was From my Heart.  It has 8 beautiful & decorative greetings stamps.  The reason I bought this stamp set, is because one of the greetings says "They say this too shall pass, they just never say when."  My mum's FAVOURITE thing to say to is..... "it'll pass"!!! How could I not have it?  

So back to the card! I've used 4 of the 6 different size framelits.  If you take a look at the photo above of the framelits, I have numbered them 1-6.  I used numbers 2,3,4 & 5 on this card.  

This isn't your regular type card.  All I have as the base is a piece of Crumb Cake cardstock (#121685) cut at 14.8 x 10.5cm (1/4 of an A4 sheet).  I then cut out my largest framelit - #5 in Smoky Slate (#131291), and embossed it using my Chevron Embossing Folder (#127749).  I scored it after the first square corner and put some adhesive on the tab and stuck it down to the back of the Crumb Cake cardstock.  Next I cut out framelit #4 out of Soft Sky (#131292) and used my Travel Journal Wheel (#126937) to decorate it in Soft Sky ink (#131181). I once again scored after the first square, put on some adhesive on the tab and stuck it on the other side of the Crumb Cake cardstock. Chances are you're confused, so check out the picture below!

 Next was framelit #3 in Daffodil Delight (#121680).  That one was super easy, it was just stuck straight down on top of the Soft Sky piece. Then I cut my piece of Crumb Cake Seam Binding Ribbon (#122332) and using adhesive I secured it across the back.  You need to tape it down on the back or else it will be flopping all around when your card recipient opens up the card to read the message! 

Then I used one of my favourite Antique Brads (#117273)!! Using my paper piercing tool (#126189) I popped a hole through the ribbon & soft sky cardstock on the front, and put in the brad and fastened it on the back.  I really like the "compass" style brad, but really, any of the 5 designs would look fab.

And now all that is left to do is the greeting on top! I pulled  out a couple of scraps of Very Vanilla cardstock (#106550), and on one piece I stamped the greeting in Crumb Cake (#126975) and on the other I stamped it again in Daffodil Delight (#126944).  Using framelit #2 I cut out the greeting through the Big Shot (#113439).  I then cut out by hand the "friendship" banner.  Using dimensionals (#104430) I adhered both greeting pieces down on top.  

Now all that is left to do, is tie your ribbon in a bow, and you have yourself a fun, different builder card.  What I love about this design, is you could adapt it to suit whatever colour inks or cardstocks you have, you can change the greeting stamp to whatever you have, you could use a different brad, or even a button.  It is such a great versatile layout that can be adapted to suit your stash.  

2013 Annual Stampin' Up! Catalogue Launch Party

Another fantastic Catalogue Launch Party done and dusted!! We had an amazing night.  I spent weeks planning and making and creating alongside my ever helpful sister, and amazing friend who owns and runs her own party planning business Lille Parti.  

We had goodie bags for our 25 guests upon their arrival, with a beautiful treat of Macadamia Toffee, and their make & take kit (and some other fun stuff too).  We had a couple of great demonstrations - one was on embellishments.  I demonstrated how to jazz up your antique brads by embossing them using coloured embossing powder.  I also showed everyone the brand new moulding clay and the wonderful things you can create with it.  Our other demonstration was on washi tape!! Love that stuff.  It is SO versatile and user friendly.  It has so many uses, it really comes down to how far you can stretch your imagination!  

Throughout the night we handed out Stampin' Up! paper money to people who asked questions, answered questions, participated where necessary, who helped out and so on.  At the end of the night we auctioned off TWO lucky door prizes.  The auction was alot of fun and I am already pencilling it in for next years launch party!  Our third lucky door prize was drawn which meant that we had lots of happy people heading home with some beautiful new products.  

Our food table was planned, prepared and decorated by Lille Parti.  There was a delicious yoghurt bar with gorgeous granola and fresh berries to mix in.  There was a DELICIOUS nutella dip for chopped bananas to be dipped in followed by sprinkles and crushed nuts and smashed oreos.  There was delicious spring rolls with sweet & sour sauce.  And oh my, the chocolate mousse shots!! 

But wait, there's more!  On the kitchen bench was the hot chocolate bar! You popped your hot chocolate ball into a mug, added hot water and some milk from the milk frother, and then there were delicious treats to pop in there.  Jersey caramels, marshmallows, Lindt flakes... you name it!  

It was an extremely fun night.  I am tired, but am so glad, as always, that the night was such a success.  I'm so lucky to have such fantastic customers.  Here are some, of my favourite photos from the night that I captured.  There are still lots to come as I ran out of time to photograph some things, and need to get my hands on them.  I will share them ASAP.  

If you live in the Brisbane area, and you're interested in hosting a workshop, or attending a class in my home, please don't hesitate to contact me.  I have events on each month that you can learn more about on my Facebook Events Page. 

Enjoy!